7" wide 12" long
7 Inside Diameter 18 Inches Long
7 Inches Inside Diameter 24 Inches Long
7 Inch Inside Diameter 36 Inches in Length
7 Inch Inside Diameter 48 Inches Long
The Insulated Elbow Kit is used when an offset is required.
Th Insulated Elbow is used when offset is required.
SuperPro Chimney features 304-alloy stainless steel for both its inner and outer liner. SuperPro also features mineral wool insulation. This insulation is made for amazing performance and dramatically reduces chemically active ingredients. It provides a thermal delay that resists and contains surges of heat, keeping the outer liner cooler.
The SuperPro Tee Plug is placed on the bottom branch of the tee for easy cleaning. Removing the Tee Plug allows the ashes and debris to fall through the opening instead of accumulating in the elbow. The Tee Plug is insulated with mineral wool for optimum performance and dramatically reduceS chemically active ingredients.
7" Adjustable Wall Support is used to support your tee and chimney sections on a side-wall installation. Attach to the side of the house. A tee mounts on top of the wall support and a chimney section then extends through the wall and into the house. A 1' chimney length should be attached below the tee and wall support to serve as a clean-out.
Adjustable Intermediate Wall Supports are used as supplementary support when the chimney system height exceeds the maximum height allowed by a wall support. Made of stainless steel. The SuperPro Adjustable Intermediate Wall Support includes a top plate, support band, side brackets, and hardware.
The Roof Support may be used on the floor, ceiling or roof and adjusts to any roof pitch.
This Adaptor Plate has a galvanized base with a stainless steel collar.
The rafter radiation shield is used for through-the-roof SuperPro Chimney installations.
7" SuperPro Firestop Radiation Shield is used when clearances are an issue.
7" Black Wall Thimble is used with a tee, a length of chimney and wall support for a side-wall installation.